Kenwood KDC-BT710DAB Instruction Manual

Contents

8Default: XXTUNER SETTINGLOCAL SEEK ON: Searches only stations with good reception. ; OFF: Cancels.• Settings made are applicable only to the selected source/station. Onceyou change the source/station, you need to make the settings again.AUTOMEMORYYES: Automatically starts memorizing 6 stations with good reception. ;NO: Cancels.• Selectable only if [NORMAL] is selected for [PRESET TYPE]. ( 4)MONO SET ON: Improves the FM reception, but the stereo effect may be lost. ;OFF: Cancels.NEWS SET ON: The unit will temporarily switch to News Programme if available. ;OFF: Cancels.REGIONAL ON: Switches to another station only in the specific region using the “AF”control. ; OFF: Cancels.AF SET ON: Automatically searches for another station broadcasting the sameprogram in the same Radio Data System network with better receptionwhen the current reception is poor. ; OFF: Cancels.TI* ON: Allows the unit to temporarily switch to Traffic Information if available(“TI” lights up). ; OFF: Cancels.* [TI] in MW/LW band is for enabling traffic interruption to DIGITAL AUDIOsource only.PTY SEARCH 1 Turn the volume knob to select the available Program Type ( 9),then press the knob.2 Turn the volume knob to select the PTY language (ENGLISH/FRENCH/GERMAN), then press the knob.3 Press S / T to start searching.Search for a station1 Press repeatedly to select TUNER.2 Press repeatedly to select FM1/FM2/FM3/MW/LW.3 Press S / T to search for a station.• To change the searching method for S / T: Pressrepeatedly.AUTO1 : Automatically search for a station.AUTO2 : Search for a preset station.MANUAL : Manually search for a station.• To store a station: Press and hold one of the number buttons (1 to 6).• To select a stored station: Press one of the number buttons (1 to 6).Other settings1 Press the volume knob to enter [FUNCTION].2 Turn the volume knob to select an item (see the following table),then press the knob.3 Repeat step 2 until the desired item is selected/activated or followthe instructions stated on the selected item.4 Press and hold to exit.To return to the previous setting item, press .ANALOG RADIOENGLISH