Kenwood KDC-BT710DAB Instruction Manual

Contents

16 ENGLISHSettings in memoryStore a contact in memoryYou can store up to 6 contacts into the number buttons(1 to 6).1 Press to enter Bluetooth mode.2 Turn the volume knob to select [CALL HISTORY],[PHONE BOOK], or [NUMBER DIAL], then press the knob.3 Turn the volume knob to select a contact or enter aphone number.If a contact is selected, press the volume knob to showthe phone number.4 Press and hold one of the number buttons (1 to 6).“STORED” appears when the contact is stored.To erase a contact from the preset memory, select[NUMBER DIAL] in step 2 and store a blank number.Make a call from memory1 Press to enter Bluetooth mode.2 Press one of the number buttons (1 to 6).3 Press the volume knob to call.“NO MEMORY” appears if there is no contacts stored.BLUETOOTH®Other settings1 Press the volume knob to enter [FUNCTION].2 Turn the volume knob to select an item (see the following table), then press theknob.3 Repeat step 2 until the desired item is selected/activated or follow the instructionsstated on the selected item.4 Press and hold to exit.To return to the previous setting item, press .Default: XXBT MODEPHONE SELECT Selects the phone or audio device to connect or disconnect.“*” appears in front of the device name when connected.“ ” appears in front of the current playback audio device.• You can only connect a maximum of two Bluetooth phones and one Bluetooth audio deviceat any time.AUDIO SELECTDEVICE DELETE 1 Turn the volume knob to select a device to delete, then press the knob.2 Turn the volume knob to select [YES] or [NO], then press the knob.PIN CODE EDIT(0000)Changes the PIN code (up to 6 digits).1 Turn the volume knob to select a number.2 Press S / T to move the entry position.Repeat steps 1 and 2 until you finish entering the PIN code.3 Press the volume knob to confirm.RECONNECT ON: The unit automatically reconnect when the last connected Bluetooth device is withinrange. ; OFF: Cancels.AUTO PAIRING ON: The unit automatically pair supported Bluetooth device (iPhone/iPod touch/Androiddevice) when it is connected through USB input terminal. Depending on the operating systemof the connected device, this function may not work. ; OFF: Cancels.INITIALIZE YES: Initializes all the Bluetooth settings (including stored pairing, phonebook, and etc.). ;NO: Cancels.