Kenwood KDC-BT752HD Instruction Manual

22 EnglishBluetooth SetupRegistering a Bluetooth Device(Pairing)Registering from this unit1 Press to enter Bluetooth mode.2 Turn the volume knob to select[SETTINGS], then press to enter.3 Turn the volume knob to select[PAIRING], then press to enter.4 Turn the volume knob to select [DEVICESEARCH], then press to enter.Search for the Bluetooth device.When search is completed, “FINISHED” isdisplayed.5 Turn the volume knob to select aBluetooth device name, press to confirm.6 “CONFIRM DVC” is displayedIf “PAIRING OK” is displayed, proceed tostep 9.If “PIN CODE” is displayed, proceed to steps7.If “*** NG” is displayed, press the volumeknob. Proceed to steps 6.7 Input the PIN code■■ To select the number, turn the volumeknob.■■ To move to the next digit, press ¢.■■ To delete the last digit, press 4.8 Press the volume knob to transmit thePIN code.If “PAIRING OK” is displayed, registration iscompleted. If the error message appearseven though the PIN code is correct, trythe procedure mentioned in Special Bluetooth device>.9 Hold to finish the procedure.■■ To cancel the Bluetooth mode, press .■■ If there are 5 or more Bluetooth devicesregistered, you cannot register a newBluetooth device.Registering a Special Bluetooth device1 Press to enter Bluetooth mode.2 Turn the volume knob to select[SETTINGS], then press to enter.3 Turn the volume knob to select[PAIRING], then press to enter.4 Turn the volume knob to select [S-DVCSELECT], then press to enter.5 Turn the volume knob to select a devicename, press to confirm.6 Go through the procedure step 4of andcomplete the registration (pairing).■■ If the device name is not in the list, select“OTHER PHONE”.Selecting the Bluetooth Device1 Press to enter Bluetooth mode.2 Turn the volume knob to select[SETTINGS], then press to enter.3 Turn the volume knob to select[PAIRING], then press to enter.4 Turn the volume knob to select [PHONESELECT] or [AUDIO SELECT], then pressto enter.5 Turn the volume knob to select aBluetooth device name.6 Press the volume knob to set up theBluetooth device.■■ “✱ (device name)”: The selectedBluetooth device is busy.■■ “- (device name)”: The selected Bluetoothdevice is on standby.■■ “(blank) (device name)“: The Bluetoothdevice is deselected.■■ If a cell-phone is already selected,deselect it, and then select a differentone.7 Hold to finish the procedure.■■ To cancel the Bluetooth mode, press .Bluetooth Device Registration TestYou can check whether your Bluetooth devicecan be registered using this unit.1 Press and hold to enter easy pairingmode“PAIRING” is displayed.Search for the Bluetooth device.When search is completed, “FINISHED” is