Kenwood KDC-BT948HD Quick Start Manual

Also see for KDC-BT948HD: Brochure & specs Instruction manual

Contents

4 | Quick Start GuideFirst stepExit Demonstration ModeTurn off the demonstration modewhen you use it for the first time afterinstallation.1 Press the [VOL] knob to quit thedemonstration mode when themessages “To Cancel Demo Press thevolume knob” are displayed (approx. 15seconds).2 Turn the [VOL] knob to select “YES”, andthen press the [VOL] knob.The demonstration mode can also becanceled in the Menu List mode.Refer to (page 38) of Instruction manual.Adjusting the Clock & Date1 Press the [MENU] button to enter theMenu List mode.2 The item can be selected anddetermined as follows.”Settings” ➜ “Clock & Date” ➜ “ClockAdjust”To select the item, turn the [VOL] knob.To determine the item, press the [VOL]knob.3 Press [4] or [¢] button to selecthour or minute to set.4 Turn the [VOL] knob to adjust the hourand minute.5 Press the [MENU] button to finish theclock adjusting.6 Turn the [VOL] knob to select “DateAdjust”, and then press the [VOL] knob.7 Press [4] or [¢] button to selectmonth, date, or year to set.8 Turn the [VOL] knob to adjust themonth, date, and year.9 Press the [MENU] button to finish thedate adjusting.10 Turn the [VOL] knob to select “DateMode select”, and then press the [VOL]knob.11 Turn the [VOL] knob to select Dateformat, and then press the [VOL] knob.12 Press the [MENU] knob for at least 1second, and then press it again briefly toexit the Menu List mode.[MENU] [VOL][¢][4]