Kenwood KDC-D300 Instruction Manual

Contents

Kenwood KDC-D300 Instruction Manual Manual pdf 7 page image

— 7 —You can select the display to enjoy sounds with eyes.Operation for "N" Setting:Each time you press the DISP button, the spectrum analyzerdisplay switches as following table;Operation for "O" Setting:Selecting CD play source mode.Each time you press the DISP button, the spectrum analyzerdisplay switches as follows;tDisplays 1 to 9 are automaticallyshown in succession forabout five seconds each.tDisplay pattern 1 Display offt sDisplay pattern 2 Display pattern 9t sDisplay pattern 3 Display pattern 8t sDisplay pattern 4 Display pattern 7t sDisplay pattern 5 Display pattern 6s21Switching Spectrum Analyzer DisplayDepending on the centre unit, the number of characters and/orthe number of discs that can be preset may differ, or operationsmay not be possible.Operation for "N" Setting:This unit permits up to 12 characters to be used for disc namepresetting with as many as 40 discs.The disc name will be displayed when the disc name has beenpreset to any of the connected units.Operation for "O" Setting:This unit permits up to 12 characters to be used for disc namepresetting with as many as 40 discs.The characters that can be entered are "A to Z, 0 to 9, []/+-*=<>".The disc name will be displayed when a CD that has been discname preset to this unit is played by this unit.NOTEPresetting Disc Names