Kenwood KDC-DAB400U Instruction Manual

Contents

ENGLISH 19INSTALLATION / CONNECTIONDo the required wiring.( 20)Dashboard of your carBend the appropriate tabs to hold themounting sleeve firmly in place.How to remove the unit1 Detach the faceplate.2 Fit the catch pin on the extraction keys into the holeson both sides of the trim plate, then pull it out.3 Insert the extraction keys deeply into the slots oneach side, then follow the arrows as shown on theright.Installing the unit (in-dash mounting)Hook on the top sideOrientate the trim plate asillustrated before fitting.Part list for installation(A) Faceplate(C) Mounting sleeve(B) Trim plate(D) Wiring harness(E) Extraction key