Kenwood KDC-DAB400U Instruction Manual

Contents

4GETTING STARTEDSet the clock and date1 Press the volume knob to enter [FUNCTION].2 Turn the volume knob to select [CLOCK], then press the knob.To adjust the clock3 Turn the volume knob to select [CLOCK ADJUST], then press the knob.4 Turn the volume knob to make the settings, then press the knob.Hour Minute5 Turn the volume knob to select [CLOCK FORMAT], then press the knob.6 Turn the volume knob to select [12H] or [24H], then press the knob.To set the date7 Turn the volume knob to select [DATE FORMAT], then press the knob.8 Turn the volume knob to select [DD/MM/YY] or [MM/DD/YY], then pressthe knob.9 Turn the volume knob to select [DATE SET], then press the knob.10 Turn the volume knob to make the settings, then press the knob.Day Month Year or Month Day Year11 Press and hold to exit.To return to the previous setting item, press .Set the initial settings1 Press repeatedly to enter STANDBY.2 Press the volume knob to enter [FUNCTION].3 Turn the volume knob to select an item (see the following table),then press the knob.4 Repeat step 3 until the desired item is selected or activated.5 Press and hold to exit.To return to the previous setting item, press .2 Default: XXAUDIO CONTROLSWITCHPREOUTREAR/ SUB-W: Selects whether rear speakers or a subwoofer areconnected to the line out terminals on the rear (through an externalamplifier).SP SELECT OFF/ 5/4/ 6 × 9/6/ OEM: Selects according to the speaker size (5 inchesor 4 inches, 6×9 inches or 6 inches) or OEM speakers for optimumperformance.TUNER SETTINGDAB L-BAND ON: Receives L-BAND ensemble during digital audio reception. ;OFF: CancelsDAB ANTPOWERON: Supplies power to the DAB antenna. Selects when using the suppliedantenna. ; OFF: Does not supply power. Selects when using passiveantenna without booster. ( 21)PRESET TYPE NORMAL: Memorizes one station for each preset button in each band(FM1/ FM2/ FM3/ MW/ LW/ DB1/ DB2/ DB3). ; MIX: Memorizes onestation (digital radio or analog radio) for each preset button, regardlessof the selected band.SYSTEMKEY BEEP ON: Activates the keypress tone. ; OFF: Deactivates.SOURCE SELECTBUILT-IN AUX ON: Enables AUX in source selection. ; OFF: Disables. ( 9)P-OFF WAIT Applicable only when the demonstration mode is turned off.Sets the duration when the unit will automatically turn off (while instandby mode) to save the battery.20M: 20 minutes ; 40M: 40 minutes ; 60M: 60 minutes ;– – –: Cancels3