Kenwood KDC-DAB41U Instruction Manual

Also see for KDC-DAB41U: Instruction manual

English 35Continued to next page150 mm70 mm *1Antenna film FEarth sheetEarth sheetAmplifier GAmplifier GFront pillarWhen installing the antenna on the left side When installing the antenna on the rightsideAntenna film F150 mm70 mm *1Determining the antenna installation locationAntenna Installation1 Check the installation location.2 Wipe the area where antenna film F,amplifier unit G, and earth sheet arepasted with the included cleaner I.The coating on the metal surface need notbe removed.■ Wait until the glass surface is completelydry before pasting.■ If the glass surface is cold, such as duringwinter, warm it with defroster or dryer.3 Remove the separator (tag I) of antennafilm F horizontally and paste theantenna on the front glass.■ Remove the separator gently.■ Do not touch the pasting surface(adhesive side) of the antenna film F.4 Remove the separator (tag II) of antennafilm F vertically and paste the antennagently while applying pressure.5 After pasting, rub the element in theglass surface in the direction of the arrowshown in the figure to bond it.6 Remove the application film (tag III).■ Do not touch the feeder terminal of theelement. Also, do not apply any glasscleaner.Feeder terminal• *1 Where the earth sheet of Amplifier G can be pasted on the metal part of the front pillar.