Kenwood KDC-MP242U Instruction Manual

Also see for KDC KDC-MP342U: Instruction manual Service manual

20 | KDC-MP342U/ KDC-MP242UConnecting Wires to TerminalsP.CONTANT.CONTMUTEBatteryGround wire (Black) - (To car chassis)FM/AM antenna inputFuse (10A)Wiring harness(Accessory1)Ignition wire (Red)Battery wire (Yellow)ACCCar fuse boxIf no connections are made, do not let the wire come out from the tab.To front left speakerTo front right speakerTo rear left speakerTo rear right speakerWhite/BlackWhiteGray/BlackGrayGreen/BlackGreenPurple/BlackPurpleIgnition key switchCar fuse box(Main fuse)To Kenwood disc changer/ External optional accessory(KDC-MP342U only)⁄ To connect these leads, refer to the relevant instruction manuals.TEL mute wire (Brown) Connect to the terminal that is grounded when either the telephone ringsor during conversation.⁄ To connect the Kenwood navigation system, consult your navigationmanual.Power control/Motor antenna control wire(Blue/White) Connect either to the power control terminal when using the optionalpower amplifier, or to the antenna control terminal in the vehicle.AUX input (Stereo)Use the mini-plug cable which is stereotype and does not have any resistance.USB connectorFront output(KDC-MP342U only)Rear output/ Sub Woofer outputNot Used (Blue)Front side