Kenwood KDC-MP242U Instruction Manual

Also see for KDC KDC-MP342U: Instruction manual Service manual

6 | KDC-MP342U/ KDC-MP242U*Factory setting*1 Function of KDC-MP342UDisplayed item is depending on currently selectedsource or mode. The mark in Condition columnshows the condition to which the item is displayed.: Can be set in other than standby state.: Can be set in standby state.: Can be set while Audio file source of CD/USB(excluding iPod).: Can be set only during playback of the iPod source.(USB source used when the iPod is connected): Can be set during Tuner source.: Can be set during FM reception.: Can be set while accessing AUX source.: Can be set while HD Radio source.: Can be set during Satellite radio source.— : Can be set during all sources.⁄• Refer to the respective page for information on how toset the items with reference page number.• Only the items available to the current source aredisplayed.Item Setting Entry Setting overview Condition Page“CODE SET”/“CODE CLR”1 sec. Sets/Resets security code. 12“SKIP”*1 “0.5%”*/ “1%”/“5%”/ “10%”Sets the ratio of skip performed with . 9“DIM” “OFF”*/ “ON” Adjusts the brightness of the display according to the surroundingillumination.—“ICON” “OFF”/ “ON1”/“ON2”*Sets the Graphics mode of the display. 17“SWPRE” “R”*/ “SW” Sets the preout output. 17“SPRM” “OFF”/ “ON”* Turns ON/OFF the Supreme function. 17“AUTO1”/ “AUTO2”/“MANUAL”“AUTO1”*/ “AUTO2”/“MANUAL”Selects the tuning mode of the radio. 17“CRSC” “OFF”/ “ON”* Switches to Monaural to decrease noise when reception is poor.“AUTO1”/ “AUTO2”/“MANUAL”*1“AUTO1”*/ “AUTO2”/“MANUAL”Sets the tuning mode of HD radio. 17“HDR MODE”*1 “AUTO”*/ “DIGITAL”/“ANALOG”1 sec. Sets the receive mode of HD Radio. 13“CHANNEL”/“PRESET”*1“CHANNEL”*/“PRESET”Sets the seek mode of satellite radio. 14“ESN=”*1 Displays the Electronic Serial Number of satellite radio.“NAME SET” 1 sec. Sets the display when switched to AUX source. 8“SCL” “AUTO”*/ “MANU” Specifies whether the text is scrolled automatically. —“AUX” “OFF”/ “ON1”*/“ON2”Sets whether to display AUX during source selection. 17“CD READ” “1”*/ “2” Sets the CD read mode. 17“DEMO” “OFF”/ “ON”* 2 sec. Specifies whether to enable demonstration. — 13Menu SystemSet up the following functions.• Strong electrical fields (such as from power lines) maycause unstable sound quality when CRSC is turned ON.In such a situation, turn it OFF.1 Enter menu modePress the Search button for at least 1 second.“MENU” is displayed.2 Select the menu itemPress the [FM+] or [AM–] button.3 Set the menu itemPress the [4] or [¢] button.4 Exit menu modePress the Search button.