Kenwood KDC-MP443U Instruction Manual

Also see for KDC-MP443U: Service manual

Contents

Kenwood KDC-MP443U Instruction Manual Manual pdf 11 page image

English | 11Deactivating Security CodeTo deactivate the Security Code function.1 Select StandbyPress the [SRC] button.Select the “STANDBY” display.2 Enter Menu modePress the Search button for at least 1 second.“MENU” is displayed.3 Select Security Code modePress the [FM+] or [AM–] button.Select the “CODE CLR” display.4 Enter Security Code modePress the [AUD] knob for at least 1 second.When “ENTER” is displayed, “CODE CLR” is alsodisplayed.5 Enter Security CodeOperation type OperationSelect the digits to enter Press the [4] or [¢] button.Select the Security CodenumbersPress the [FM+] or [AM–] button.6 Press the [AUD] knob for at least 3 seconds.“CLEAR” is displayed.The Security Code function deactivates.7 Exit Security Code modePress the Search button.⁄• If a wrong security code is entered, “ERROR” is displayed.Enter a correct security code.Entering Security CodeThe Security Code is required to use the audio unitwhen the unit is first used after removed from thebattery power source or the Reset button is pressed.1 Turn the power ON.2 Do the step 5 through 6 operation, and enterthe Security Code.“APPROVED” is displayed.Now, you can use the unit.Demonstration mode settingSetting the demonstration mode as follows;Display Setting“DEMO ON” The Demonstration mode function is ON.“DEMO OFF” Exit Demonstration mode (Normal mode).1 Enter Menu modePress the Search button for at least 1 second.“MENU” is displayed.2 Select Demonstration modePress the [FM+] or [AM–] button.Select the “DEMO” display.3 Set the Demonstration modePress the [AUD] knob for at least 2 seconds.4 Exit Demonstration modePress the Search button.