Kenwood KDC-MP5029V Instruction Manual

English | 11Tuner featuresTuningSelecting the station.1 Select tuner sourcePress the [SRC] button.Select the "TUNER" display.2 Select the bandPush the Control knob to [FM] or [AM].Each time the knob is pushed to [FM], it switchesbetween the FM1, FM2, and FM3 bands.3 Tune up or down bandPush the Control knob to [4] or [¢].• During reception of stereo stations the "ST" indicatoris ON.Tuning ModeChoose the tuning mode.Press the [AUTO] button.Each time the button is pressed, the Tuningmode switches as shown below.Tuning mode Display OperationAuto seek "AUTO 1" Automatic search for a station.Preset station seek "AUTO 2" Search in order of the stationsin the Preset memory.Manual "MANUAL" Normal manual tuning control.Station Preset MemoryPutting the station in the memory.1 Select the bandPush the Control knob to [FM] or [AM].2 Select the frequency to put in the memoryPush the Control knob to [4] or [¢].3 Put the frequency in the memoryPress the desired [1] — [6] button for at least2 seconds.The preset number display blinks 1 time.On each band, 1 station can be put in thememory on each [1] — [6] button.SRCAUTO/AME1 - 6Band display Frequency display Preset station numberST indicatorControl knob