8|EnglishGeneral featuresAttenuatorTurning the volume down quickly.Press the [ATT] button.Each time the button is pressed, the Attenuatorturns ON and OFF.When it’s ON, the "ATT" indicator blinks.System QYou can recall the best sound setting preset fordifferent types of music.1Select the source to setPress the [SRC] button.2Select the Sound typePress the [Q] button.Each time the button is pressed, the soundsetting switches.Sound settingDisplayNatural"NATURAL"User memory"USER"Rock"ROCK"Pops"POPS"Easy"EASY"Top 40"TOP 40"Jazz"JAZZ"• User memory: The values set on the (page 8).This unit doesn't have the User memory function sothe values of Bass, Middle, and Treble set in audiocontrol are replaced to the System Q values and"USER" is not be displayed when the System Q settingis changed.• Each setting value is changed with the Setting> (page 9).First, select the speaker type with the Speaker setting.Audio Control1Select the source for adjustmentPress the [SRC] button.2Enter Audio Control modePress the [VOL] knob.3Select the Audio item for adjustmentPress the [VOL] knob.Each time the knob is pressed, the items that canbe adjusted switch as shown below.4Adjust the Audio itemTurn the [VOL] knob.Adjustment ItemDisplayRangeBass level"BAS L"–8 — +8Middle level"MID L"–8 — +8Treble level"TRE L"–8 — +8Balance"BAL"Left 15 — Right 15Fader"FAD"Rear 15 — Front 155Exit Audio Control modePress any button.Press the button which is not [VOL] knob and[ATT] button.Audio SetupSetting the Sound system, such as Volume offsetand Loudness.1Select the source for adjustmentPress the [SRC] button.2Enter Audio Setup modePress the [VOL] knob for at least 1 second.3Select the Audio Setup item for adjustmentPress the [VOL] knob.Each time the knob is pressed, the items that canbe adjusted switch as shown below.4Adjust the Audio setup itemTurn the [VOL] knob.Adjustment ItemDisplayRangeVolume offset"V-OFF"–8 — ±0Loudness"LOUD"ON/OFF• Volume offset: Each source’s volume can be set as adifference from the basic volume.• Loudness: Compensating for low and high tonesduring low volume.5Exit Audio Setup modePress the [VOL] knob for at least 1 second.