Kenwood KDC-MP5036U Instruction Manual

Also see for KDC-MP5036U: Firmware update guide Service manual

English | 13Playing CD & Audio fileWhen there is no disc inserted1 Drop open the faceplatePress the Release button.2 Insert a disc.3 Push the faceplate on the left side, and return itto its former position.¤• When the faceplate has been dropped open, it mightinterfere with the shift lever or other vehicle function.If this happens, pay attention to safety and move theshift lever or take an appropriate action to remove theobstacle, then operate the unit.• Do not use the unit with the faceplate in the opencondition. If it’s used in the open position dust can enterthe inside part and cause damage.⁄• For the audio files and discs you can play with this unit,refer to (page 4).• You can play the file made by KENWOOD Music Editor bythe same operation.• When a disc is inserted, the "IN" indicator is ON.When a disc is insertedPress the [SRC] button.Select the "CD" display.Pause and playPress the Control knob.Each time you press the knob, the audio pauses orplays.Eject the disc1 Drop open the faceplatePress the Release button.2 Eject the discPress the [0] button.3 Press the faceplate on the left side, and return itto its former position.⁄• You can eject the disc for 10 minutes after switching offthe engine.CD/USB device/Audio file/External disc control featuresSRCSCANS.MODE RDM/3/A.RDM REP F.SEL M.RDM Control knobIN indicator Disc numberTrack number Play timeRelease button