Kenwood KDC-MP5036U Instruction Manual

Also see for KDC-MP5036U: Firmware update guide Service manual

English | 19Menu SystemSetting beep sound during operation, etc.functions.The Menu system basic operation method isexplained here. The reference for the Menu itemsand their setting content is after this operationexplanation.1 Enter Menu modePress the [MENU] button."MENU" is displayed.2 Select the menu itemPush the Control knob towards up or down.Example: When you want to set the beep soundselect the "BEEP" display.3 Set the menu itemPush the Control knob towards right or left.Example: When you select "BEEP", each time youpush the knob it alternates between"BEEP ON" or "BEEP OFF". Select 1 of themas the setting.You can continue by returning to step 2 andsetting other items.4 Exit Menu modePress the [MENU] button.⁄• When other items those applicable to the basicoperation method above are displayed, their settingcontent chart is entered. (Normally the setting listed atthe top of the chart is the original setting.)Also, the explanation for items that are not applicable( etc.) are entered step bystep.Menu systemSRCMENU Control knobMenu display