Kenwood KDC-MP535U Instruction Manual

Also see for KDC-MP535U: Firmware update guide Installation manual Service manual

Kenwood KDC-MP535U Instruction Manual Manual pdf 31 page image

English | 31Connecting Wires to TerminalsP.CONTILLUMIANT.CONTMUTEFRONT LFRONT RREAR LREAR R–+SUBWOOFERAUX INREMO.CONTFM/AM antenna inputFront left output (White)Front right output (Red)Fuse (10A)Wiring harness(Accessory1)White/BlackGray/BlackGreen/BlackPurple/BlackWhiteGrayGreenPurpleTo front left speakerTo front right speakerTo rear right speakerTo rear left speakerIgnition wire (Red)Battery wire (Yellow)Ground wire (Black) · (To car chassis)Ignition keyswitchCar fuse box(Main fuse)ACCCar fuseboxBatteryIf no connections are made, do not let the wire come out from the tab.Power control wire (Blue/White)Motor antenna control wire (Blue)Dimmer control wire (Orange / White)When using the optional power amplifier, connect to its powercontrol terminal.To car light control switchDepending on what antenna you are using, connect either to thecontrol terminal of the motor antenna, or to the power terminalfor the booster amplifier of the film-type antenna.Sub Woofer left output (White)Sub Woofer right output (Red)To connect the Kenwood navigation system, consult yournavigation manual.TEL mute wire (Brown) Connect to the terminal that is grounded when either thetelephone rings or during conversation.To connect these leads, refer to the relevant instructionmanuals.To Kenwood disc changer/External optional accessoryRear left output (White)Rear right output (Red)Do not remove the capwhen you do not use theUSB cable. The connectorwill cause the unit tomalfunction if it gets intouch with any metallicpart of the vehicle.• Fasten the connectorwith the tape so that thecable will not come off.USB connector (1m)To USB deviceAUX input (Stereo)Use the mini-plug which is stereo typeand does not have any resistance.To use the steering wheelremote control feature, youneed to an exclusive remoteadapter (not supplied)matches your car is required.Steering remote control(Light Blue/Yellow)(KDC-X591 only)Tape