Kenwood KDC-MP632U Instruction Manual

Also see for KDC-MP532U: Service manual Instruction manual Instruction manual

Contents

Kenwood KDC-MP632U Instruction Manual Manual pdf 12 page image

12 | EnglishGeneral featuresSystem QSelecting the best sound setting preset fordifferent types of music.1 Select the source to setPress the [SRC] button.2 Select the Sound typePress the [Q] button.When you press the button once, the currentsound setting is displayed.Each time you press the button, the soundsetting alternates.Sound setting DisplayUser memory "USER"Rock "ROCK"Pops "POPS"Easy "EASY"Top 40 "TOP 40"Jazz "JAZZ"Natural "NATURAL"• * User memory: The values set on the Control> (page 12).KDC-MP532U does not have the User memoryfunction so the values of Bass, Middle, and Treble setin audio control are replaced to the System Q valuesand "USER" is not displayed when the System Qsetting is changed.• Change each setting value with the Setting> (page 14).First, select the speaker type with the Speaker setting.Audio Control1 Select the source to adjustPress the [SRC] button.2 Enter Audio Control modePress the [VOL] knob.3 Select the Basic Audio item to adjustPress the [VOL] knob.Each time you press the knob, the item to beadjusted alternates between the items shown inthe table below.4 Adjust the Basic Audio itemTurn the [VOL] knob.Adjustment Item Display RangeRear Volume * 1,2 "R-VOL" 0 — 35Subwoofer level*1,3,4,5 "SW L" –15 — +15Bass level*6 "BAS L" –8 — +8Middle level* 6 "MID L" –8 — +8Treble level*6 "TRE L" –8 — +8Balance "BAL" Left 15 — Right 15Fader*5 "FAD" Rear 15 — Front 15Exit Audio Control mode (Volume control mode)• * 1 Function of KDC-X590/MP632U.• * 2 You can control this item when "2ZON" of Setup> (page 14) is set to "ON".• * 3 You can control this item when (page 30) is set to "SWPRE SW". (KDC-MP632U only)• * 4 You can control this item when Output> (page 15) is set to "SW ON".• * 5 You can control this item when "2ZON" of Setup> (page 14) is set to "OFF".• * 6 You can adjust these items in detail. Refer to(Page13).(KDC-X590 only)• * 6 Source tone memory: Puts the set up value in thememory per source. (Detail Audio item is included :KDC-X590 only)5 Exit Audio Control modePress any button.Press a button other than the [VOL] knob and[ATT] button.