20 | EnglishGeneral featuresStation/Disc Naming (SNPS/DNPS)Attaching a title to a Station or CD.1 Receive/play the station/disc you want toattach a title to• A title can’t be attached to MD or Audio file media.2 Enter Menu modePress the [MENU] button for at least 1 second."Menu" is displayed.3 Select Name set modePush the Control knob to [FM] or [AM].Select the "Name Set" display.4 Enter Name set modePress the Control knob for at least 1 second.5 Move the cursor to the enter characterpositionPush the Control knob to [4] or [¢].6 Select the character typePress the Control knob.Each time the knob is pressed, the character typeswitches as shown below.Character typeAlphabet upper caseAlphabet lower caseNumbers and symbolsSpecial characters (Accent characters)7 Select the charactersPush the Control knob to [FM] or [AM].• Characters can be entered by using a remote with anumbers buttons.Example: If "DANCE" is entered.Character Button Times pressed"D" [3] 1"A" [2] 1"N" [6] 2"C" [2] 3"E" [3] 28 Repeat steps 5 through 7 and enter the name.9 Exit Menu modePress the [MENU] button.• When operation stops for 10 seconds the name atthat time is registered, and Name Set mode closes.• Memory numbers- FM/AM: 30 stations- Internal CD player: 10 discs- External CD changer/ player: Varies according to theCD changer/ player. Refer to the CD changer/ playermanual.• The title of station/CD can be changed by the sameoperation used to name it.Theft Deterrent FaceplateThe faceplate of the unit can be detached andtaken with you, helping to deter theft.Removing the FaceplatePress the Release button.The faceplate is unlocked, allowing you to detachit.• The faceplate is a precision piece of equipment andcan be damaged by shocks or jolts. For that reason,keep the faceplate in its special storage case whiledetached.• Do not expose the faceplate or its storage case todirect sunlight or excessive heat or humidity. Alsoavoid places with too much dust or the possibility ofwater splashing.