Kenwood KDC-PS907 Instruction Manual

Also see for KDC-PS907: Instruction manual Instruction manual

Contents

Kenwood KDC-PS907 Instruction Manual Manual pdf 28 page image

▼Bass N-FLevel▼ ▲Treble Fader▼ ▲BalanceDisc changer control features (See page 10)28EnglishDisc Name Preset Play (DNPP)If you have preset the name of a disc that you want to listento in the disc changer, you can look for it by name and startplaying it.Press the DNPP button on the remote."DNP PLAY" will appear in the display, and the disc namepreset play mode is entered.The names of all the discs in the disc changer will appearsuccessively in the display for five seconds each. Discs whosenames have not been preset will appear as "NO NAME" in thedisplay.Discs in the disc changer that have never been played before willappear as "NO ACCES" when the disc names are displayed.When you cannot identify a disc because of the "NO ACCES"display after inserting a disc magazine, try playing it using thedisc scan or a similar function to display the disc name.Rapid display (forward / reverse):Press the DISC + or DISC – button.Pressing the DISC + button will rapidly display the presetnames/disc titles in order.Pressing the DISC – button will rapidly display the presetnames/disc titles in reverse order.When the name appears for the disc you want to playPress the OK button.The disc whose name is displayed will be recalled, and the discname preset play (DNPP) mode will end.To cancel DNPP mode:Press the DNPP button.The disc name preset play (DNPP) mode will be canceled.2NOTE1Function of Remote (See page 11) Audio Control SettingAdjust various parameters of sound quality.Press the AUD button to enter the control mode.Press either the FM or AM button.Each time the button is pressed, the adjustment mode willchange as follows:Pressing the FM button advances the display, and pressing theAM button reverses it.• When preout is switched to unbalanced• When preout is switched to balancedSource tone memoryEach source (CD, FM, AM and disc changer) has its own memoryin which to store the bass and treble tone settings.The settings made for a particular source are recalledautomatically whenever you use that source (for example, FMmode uses the tone settings made for FM, AM for AM, etc.).Press the 4/¢ button.Look at the table (See page 29) to adjust the mode beingdisplayed.Press the AUD button to end the control mode.43NOTE21Other features (See page 10)▼Bass Sub-preoutlevel▼ ▲Treble Balance▲Only when monaural output isset to on( )Only when Non-fading output isset to on( )