English29The balance of the non-fading sound cannot be adjusted.NOTETable of Audio Control SettingBass(“BAS”)Treble(“TRE”)Balance(“BAL”)Fader(“FAD”)Non-FadingPreout Level(“NF”)Bass decreased.Treble decreased.Left channelemphasized.Rear channelincreased.Non-fading sound isreduced.Bass increased.Treble increased.Front channelincreased.Non-fading soundemphasized.Right channelemphasized.Adjustmentmode(Display) 4 button ¢ buttonOperation of Audio control buttonBalancedmonauralpreout level(“SUB”)Monaural sound isreduced.Monaural soundemphasized.Clock DisplayDisplay the time.Switching to Time Display:Keep pressing the CLK button until the clock is displayed.Adjusting TimeYou can adjust the time manually. Also, with the automatictime adjustment function set at ON, you can set the clock timeautomatically according to time data sent from RBDS stations(after receiving RBDS signals for several minutes). The factorydefault is manual time adjustment.Adjusting Time Manually:When the time is not displayed, first press the CLK button todisplay the time.While holding down the CLK button, press the 4 or ¢buttons to adjust the time.The 4 button adjusts the hour and the ¢ button adjuststhe minutes.Do not press the CLK button for two seconds or more, as it willchange to the name preset mode.Press the 4 or ¢ button quickly to adjust the clock.Turning Automatic Time Adjustment On/Off:Press the TUN button repeatedly and switch the display to"ALL OFF" to enter the standby mode.Press the #1 button for at least three seconds.Each time you press the button, the automatic timeadjustment function switches on and off."SYNC ON" (automatic time adjustment is on.)"SYNC OFF" (automatic time adjustment is off.)Adjusting Time Automatically:Tune to a RBDS station and receive the signal for severalminutes.The clock will adjust automatically to the local time.The clock will not adjust automatically if the RBDS station tunedto is not transmitting time data. In such a case, try anotherRBDS station.NOTE21NOTE21
