Kenwood KDC-PSW9524 Instruction Manual

Also see for KDC-8024: Service manual

Contents

The Backpanel of the unit can be detached and taken with you,helping to deter theft.Removing the Backpanel1 Turn the ignition OFF or press the [SRC] button for at least 1second.Turn OFF the power, and the control panel becomes horizontal.After the set time passes in (page 46), thepanel is closed.2 Remove the Backpanel forward.When (page 45) is set to ON,DSI blinks.• The back panel is a precision piece of equipment and can bedamaged by shocks or jolts. For that reason, keep the back panelin its special storage case while detached.• Do not expose the Backpanel or its storage case to direct sunlightor excessive heat or humidity. Also avoid places with too muchdust or the possibility of water splashing.Reattaching the Backpanel1 Set the Backpanel to the panel bracket.2 Hold down on the Backpanel until it is locked.Theft Deterrent PanelGeneral features— 24 —EnglishSelecting the display when this device is switched to Auxiliaryinput source.1 Select Auxiliary input sourcePress the [SRC] button.Select the "AUX1" display.2 Enter Auxiliary input display setting modePress the [NAME.S] button for at least 2 seconds.The presently selected AUX Name is blinks.3 Select the Auxiliary input displayPress the [4] or [¢] button.Each time the button is pressed it switches through the belowdisplays.• "AUX1"• "TV"• "VIDEO"• "GAME"• "PORTABLE"• "DVD"4 Exit Auxiliary input display setting modePress the [NAME.S] button.When operation stops for 10 seconds, the name at that time isselected, and Auxiliary input display setting mode closes.Auxiliary Input Display SettingKDC-PSW9524_U.S_r5.pg 02.12.13 2:05 PM Page 24