Inputting the telephone number with number buttons on theremote, and dialing.1 Select the key function sectionPress the [NEXT] button.Repeatedly press the button until "H-F" is displayed above the [2]button.Refer to (page 8).2 Enter Hands Free modePress the [2] ("H-F") button.3 Select the Dial ModePress the [3] ("DIAL") button."Number Dial" is displayed.4 Enter the telephone numberPress the number [#], [*] and [+](ANG) buttons on theremote.• You can input max 32 digits.• If an incorrect digit is entered, pressing the [4] button will clearit.5 Dial an input numberPress the [4] ("CALL") button.Direct Dial (Function of remote)7 Hang upPress the [2] ("HANG") button.Canceling the Hands Free modePress the [RTN] button.Selecting a telephone number from the phone book.1 Select the key function sectionPress the [NEXT] button.Repeatedly press the button until "H-F" is displayed above the [2]button.Refer to (page 8).2 Enter Hands Free modePress the [2] ("H-F") button.3 Select the Phone Book Search Mode itemPress the [2] ("SRCH") button.Each time the button is pressed the mode switches as follows:Phone Book Search Mode item DisplayInitial Select Mode "Initial Select"Redial Mode "Redial"4 Select the initial of a person to dial (In Initial Select Mode)Press the [FM] or [AM] button.Initials including no corresponding name will not be displayed.5 Switch the NamePress the [4] or [¢] button.Switching between the Name and Telephone NumberPress the [TI] button.• Not available if the name has not been stored.• Not applicable if the text scroll function has been set to Auto (inmenu).Scrolling the Name and Telephone NumberPress the [SCRL] button.6 Dial a selected numberPress the [4] ("CALL") button.Phone Book SearchGSM Hands Free Unit control features— 40 —EnglishKDC-PSW9524_U.S_r5.pg 02.12.13 2:05 PM Page 40
