Kenwood KDC-U6046L Instruction Manual

Also see for KDC-U6046: Service manual Quick start guide

English | 13Tuner OperationStation Preset MemoryPutting a station in the memory.1 Select the frequency to put in the memoryPush the Control knob towards right or left.2 Enter Preset Memory modePress the [ ] button.3 Preset the stationTurn the Control knob to select preset number(“P1” – “P6”), and then press the [ENTER] buttonfor at least 2 seconds.Cancelling the Preset Memory modePress the [ ] button.Preset TuningRecalling the stations in the memory.1 Enter Preset Tuning modePress the [ ] button.2 Recall the stationTurn the Control knob to select recall number(“P1” – “P6”), and then press the [ENTER].Cancelling Preset TuningPress the [ ] button.Function of remote controlDirect Access TuningEntering the frequency and tuning.1 Enter Direct Access Tuning modePress the [DIRECT] button on the remotecontrol.“– – – –” is displayed.2 Enter the frequencyPress the number buttons on the remotecontrol.Example:Desired frequency Press button92.1 MHz (FM) [9], [2], [1]810 kHz (AM) [8], [1], [0]3 Search the frequencyPress the [4] or [¢] button on the remotecontrol.Cancelling Direct Music SearchPress the [ ] button on the remote control.⁄• You can enter the FM band frequency in steps of aminimum of 0.1 MHz.Frequency Step SettingChanging the tuning frequency step.The original setting is FM band 50 kHz, and AMband 9 kHz.1 Turn the power OFFPress the [SRC] button for at least 1 second.2 Switch the frequency stepWhile pressing the [FAVORITE] button and[ENTER] button, press the [SRC] button.Release your fingers from the button after thedisplay appears.The frequency step changes to FM band 200 kHz,and AM band 10 kHz.⁄• When the same operation is repeated, the frequency stepreturns to the original setting.• When the frequency step is changed, the frequencies in thememory are deleted.