Kenwood KDC-W4537U Instruction Manual

Kenwood KDC-W4537U Instruction Manual Manual pdf 24 page image

24 | EnglishMenu systemIn Standby modeSecurity CodeActivating the Security Code disables the usageof audio unit by someone else. Once the SecurityCode is activated, the entry of authorized SecurityCode is required to turn on the audio unit when it isremoved from the vehicle. Indication of this SecurityCode activation prevents your precious audio unitfrom stealing.⁄• When you activate the Security Code function, it cannot bereleased.Note, your Security Code is the 4 digit number entered inyour "Car Audio Passport" in this package.1 Enter StandbyPress the [SRC] button.Select the "STANDBY" display.2 Enter Menu modePress the [MENU] button.When "MENU" is displayed, "CODE SET" is alsodisplayed.3 Enter Security Code modePress the Control knob for at least 1 second.When "ENTER" is displayed, "CODE" is alsodisplayed.4 Select the digits to enterPush the Control knob towards right or left.5 Select the Security Code numbersPush the Control knob towards up or down.6 Repeat step 4 and 5, and complete the SecurityCode.7 Confirm the Security CodePress the Control knob for at least 3 seconds.When "RE-ENTER" is displayed, "CODE" is alsodisplayed.8 Do the step 4 through 7 step operation, andreenter the security code."APPROVED" is displayed.The Security Code function activates.⁄• If you enter a Code different from your Security Code,you have to start over from step 4.9 Exit Security Code modePress the [MENU] buttonResetting the Security Code function when theaudio unit is first used after removed from thebattery power source or the Reset button ispressed1 Turn the power ON.2 Do the step 4 through 7 step operation, andreenter the security code."APPROVED" is displayed.Now, you can use the unit.⁄• If an incorrect code is entered, "WAITING" is displayed,and the input prohibition periods shown in the tablebelow is generated.After the input prohibition time lapses, "CODE" isdisplayed, and you can reenter the code.Number of times theincorrect code was inputInput prohibited time1 —2 5 minutes3 1 hour4 24 hoursIn Standby modeTouch Sensor ToneSetting the operation check sound (beep sound)ON/OFF.Display Setting"BEEP ON" Beep is heard."BEEP OFF" Beep canceled.In Standby modeManual Clock Adjustment⁄• You can do this adjustment when the (page 25) is set as OFF.1 Select Clock Adjustment modePush the Control knob towards up or down.Select the "CLK ADJ" display.