Kenwood KDC-W4537U Instruction Manual

Kenwood KDC-W4537U Instruction Manual Manual pdf 6 page image

6 | EnglishNotesHandling CDs• Do not touch the recording surface of the CD.• Do not stick tape etc. on the CD, or use a CD withtape stuck on it.• Do not use disc type accessories.• Clean from the center of the disc and moveoutward.• When removing CDs from this unit, pull them outhorizontally.• If the CD center hole or outside rim has burrs,use the CD only after removing the burrs with aballpoint pen etc.CDs that cannot be used• CDs that are not round cannot be used.• CDs with coloring on the recording surface or CDsthat are dirty cannot be used.• This unit can only play the CDs with .This unit may not correctly play discs which do nothave the mark.• You cannot play a CD-R or CD-RW that has not beenfinalized. (For the finalization process refer to yourCD-R/CD-RW writing software, and your CD-R/CD-RW recorder instruction manual.)This Product is not installed by the manufacturer of avehicle on the production line, nor by the professionalimporter of a vehicle into an EU Member State.Information on Disposal of Old Electricaland Electronic Equipment (applicable forEU countries that have adopted separatewaste collection systems)Products with the symbol (crossed-outwheeled bin) cannot be disposed ashousehold waste.Old electrical and electronic equipmentshould be recycled at a facility capableof handling these items and their wastebyproducts. Contact your local authorityfor details in locating a recycle facilitynearest to you. Proper recycling and wastedisposal will help conserve resources whilstpreventing detrimental effects on ourhealth and the environment.The marking of products using lasers(Except for some areas)CLASS 1LASER PRODUCTThe label is attached to the chassis/case and saysthat the component uses laser beams that have beenclassified as Class 1. It means that the unit is utilizinglaser beams that are of a weaker class. There is nodanger of hazardous radiation outside the unit.