Kenwood KDC-W5031 Instruction Manual

Also see for KDC-W5031: Service manual Service manual

Kenwood KDC-W5031 Instruction Manual Manual pdf 18 page image

18 | EnglishCD/Audio file/External disc control featuresFast Forwarding and ReversingFast ForwardingHold down on [¢] of the Control knob.Release your finger to play the disc at that point.ReversingHold down on [4] of the Control knob.Release your finger to play the disc at that point.• The sound is not output while the Audio file is beingsearched.Track/File SearchSearching for a song on the disc or in the Audiofile folder.Push the Control knob to [4] or [¢].• If the remote with number buttons is used as optionalaccessories, a song you’d like to listen to can directlybe selected with the operation below. (KDC-W5031only)1. Enter a track/file number.Press the number buttons on the remote.2. Do the Track/File Search.Push the control knob to [4] or [¢].Function of disc changer/ Audio fileDisc Search/Folder SearchSelecting the disc set in the Disc changer or thefolder recorded on the Audio file media.Push the Control knob to [FM] or [AM].Playing CD & Audio fileWhen there is no disc inserted1 Drop open the faceplatePress the Release button.2 Insert a disc.3 Push the faceplate on the left side, and returnit to its former position.• When the faceplate has been dropped open, it mightinterfere with the shift lever or something else. If thishappens, pay attention to safety and move the shiftlever or take an appropriate action, then operate theunit.• Do not use the unit with the faceplate in the opencondition. If it’s used in the open position dust canenter the inside part and cause damage.• Refer to (page 6) for theAudio file by models which can be played.• When a disc is inserted, the "IN" indicator is ON.When a disc is insertedPress the [SRC] button.Select the "CD" display.Pause and playPress the Control knob.Each time the knob is pressed, it pauses andplays.Eject the disc1 Drop open the faceplatePress the Release button.2 Eject the discPress the [0] button.3 Press the faceplate on the left side, andreturn it to its former position.