Kenwood KDC-W5031 Instruction Manual

Also see for KDC-W5031: Service manual Service manual

Kenwood KDC-W5031 Instruction Manual Manual pdf 8 page image

8 | EnglishGeneral featuresAttenuatorTurning the volume down quickly.Press the [ATT] button.Each time the button is pressed, the Attenuatorturns ON and OFF.When it’s ON, the "ATT" indicator blinks.System QYou can recall the best sound setting preset fordifferent types of music.1 Select the source to setPress the [SRC] button.2 Select the Sound typePress the [Q] button.When the button is pressed once, the currentsound setting is displayed.Each time the button is pressed, the soundsetting switches.Sound setting DisplayNatural "NATURAL"Rock "ROCK"Pops "POPS"Easy "EASY"Top 40 "TOP40"Jazz "JAZZ"• Each setting value is changed with the Setting> (page 9).First, select the speaker type with the Speaker setting.• When the System Q setting is changed, the Bass,Middle, and Treble set in audio control replace theSystem Q values.• When the value is set up by

"USER" is displayed.Audio Control1 Select the source for adjustmentPress the [SRC] button.2 Enter Audio Control modePress the [VOL] knob.3 Select the Audio item for adjustmentPress the [VOL] knob.Each time the knob is pressed, the items that canbe adjusted switch as shown below.4 Adjust the Audio itemTurn the [VOL] knob.Adjustment Item Display RangeBass level "BAS L" –8 — +8Middle level "MID L" –8 — +8Treble level "TRE L" –8 — +8Balance "BAL" Left 15 — Right 15Fader "FAD" Rear 15 — Front 155 Exit Audio Control modePress any button.Press the button which is not [VOL] knob and[ATT] button.Audio SetupSetting the Sound system, such as Volume offsetand Loudness.1 Select the source for adjustmentPress the [SRC] button.2 Enter Audio Setup modePress the [VOL] knob for at least 1 second.3 Select the Audio Setup item for adjustmentPress the [VOL] knob.Each time the knob is pressed, the items that canbe adjusted switch as shown below.