22 | EnglishMenu systemIn Standby modeTouch Sensor ToneSetting the operation check sound (beep sound)ON/OFF.Display Setting"BEEP ON" Beep is heard."BEEP OFF" Beep canceled.In Standby modeManual Clock Adjustment• You can do this adjustment when the Clock> (page 22) is set as OFF.1 Select Clock Adjustment modePush the Control knob towards [FM] or [AM].Select the "CLK ADJ" display.2 Enter Clock Adjust modePress the Control knob for at least 1 second.The clock display blinks.3 Adjust the hoursPush the Control knob towards [FM] or [AM].Adjust the minutesPush the Control knob towards [4] or[¢].4 Exit Clock adjustment modePress the [MENU] button.Function of the KDC-W534In Standby modeSynchronize ClockSynchronizing the RDS station time data and thisunit’s clock.Display Setting"SYNC ON" Synchronizes the time."SYNC OFF" Adjust the time manually.• It takes 3 to 4 minutes to synchronize the clock.DSI (Disabled System Indicator)A red indicator will blink on the unit after thefaceplate is removed, warning potential thieves.Display Setting"DSI ON" LED flashes."DSI OFF" LED OFF.Display Illumination ControlThis function turns off the display when youperform no operation for 5 seconds. This functionis effective when you are driving at night.Display Setting"DISP ON" Keeps the display on."DISP OFF" Turns off the display when you perform nooperation for 5 seconds.• Set the Display Illumination Control when the (page 25) is set toOFF.• When the display is off, pressing any key will turn onthe display.• When the display is off, you cannot perform anyoperation except for the following:• Volume• Attenuator• Selecting the source• Ejecting the disc• Turning off the power• Dimmer Control• During function control, such as the Menu System, thedisplay stays on.In Standby modeSelectable IlluminationSelecting the button illumination color as greenor red.Display Setting"KEY RED" The illumination color is red."KEY GRN" The illumination color is green.
