Kenwood KDC-W534 Instruction Manual

Also see for KDC-W534: Service manual Instruction manual

Kenwood KDC-W534 Instruction Manual Manual pdf 23 page image

English | 23In Audio file sourceSupreme SettingWhen AAC, MP3 or WMA files encoded at a lowbit rate (less than 96kbps (fs=32k, 44.1k, 48kHz))are played, this function restores their highfrequency region to approach the sound qualityof equivalents of these files encoded at a high bitrate. Processing is optimized for the compressionformat used (AAC, MP3, or WMA), and adjustmentis made for the bit rate used.Display Setting"SPRM ON" Plays sound using the Supreme function."SPRM OFF" Plays the original sound stored in the audio file.• The sound effect may be imperceptible dependingon the relationship between the audio file format andsetting.Function of the KDC-W534News Bulletin with Timeout SettingThe tuner automatically changes when a newsbulletin starts even if the radio is not beinglistened to. Also, you can set the time intervalwhen interruption is prohibited.Display and Setting"NEWS OFF""NEWS 00M"…"NEWS 90M"When you set "NEWS 00M" — "NEWS 90M", theNews Bulletin Interrupt function is ON.When the News Bulletin is ON, the "NEWS"indicator is ON.When the news bulletin starts, "NEWS" isdisplayed, and the tuner changes to the newsbulletin.• If you choose the "20MIN" setting, further newsbulletins will not be received for 20 minutes once thefirst news bulletin is received.• The news bulletin volume is the same level that wasset for (page 15).• This news bulletin function is only available if thedesired station sends PTY-code for news bulletin orbelongs to -Networksending PTY-code for news bulletin.• When the News Bulletin Interrupt function is ON, thetuner changes to an FM station.In Tuner modeLocal SeekOnly stations whose reception is good aresearched in auto seek tuning.Display Setting"LO.S OFF" The local seek function is OFF."LO.S ON" The local seek function is ON.Function of the KDC-W534In Tuner modeTuning ModeSets the tuning mode.Tuning mode Display OperationAuto seek "AUTO 1" Automatic search for a station.Preset station seek "AUTO 2" Search in order of the stationsin the Preset memory.Manual "MANUAL" Normal manual tuning control.