Kenwood KDC-W6527SE Instruction Manual

Also see for KDC-W6527: Service manual

Kenwood KDC-W6527SE Instruction Manual Manual pdf 28 page image

28 | EnglishMenu systemFunction of the KDC-W6527SE/ KDC-W6527In External disc, or Auxiliary input sourceDual Zone SystemMakes the sound different for the front channeland rear channel.Display Setting"Zone 2 OFF" The front and rear are the same source sound."Zone 2 ON" The front and rear are the different source sound.• When the Dual Zone System is on, there is only soundeffect including Audio control for internal source.• When you set the Dual zone system to ON while thesubwoofer preout is switched ON, the sound of thesubwoofer preout isn’t output.• When the source is selected to VZ-7000P/N (optionalaccessory), the VZ-7000P/N’s sound is not output if theDual Zone System is turned ON.Function of the KDC-W6527SE/ KDC-W6527When the Dual Zone System is OFFDual Zone System SettingSetting the Front channel and Rear channelsound in the Dual Zone System.Display Setting"Zone 2 Rear" The front is this unit’s internal source, and the rearis selected source sound."Zone 2 Front" The rear is this unit’s internal source, and the frontis selected source sound.B.M.S. (Bass Management System)Adjust the bass boost level of the externalamplifier using the main unit.Display Setting"AMP Bass Flat" Bass boost level is flat."AMP Bass +6" Bass boost level is low (+6dB)."AMP Bass +12" Bass boost level is mid (+12dB)."AMP Bass +18" Bass boost level is high (+18dB).• Refer to the catalog or instruction manual for poweramplifiers that can be controlled from this unit.• For amplifiers there are the model that can be setfrom Flat to +18 dB, and the model that can be setfrom Flat to +12 dB.When an amplifier that can only be set to +12 isconnected to the unit, "AMP Bass +18" won’t workcorrectly even if it’s selected.B.M.S. Frequency OffsetSetting the central frequency boosted by B.M.S.Display Setting"AMP FREQ Normal" Boost with the normal central frequency."AMP FREQ Low" Drop the normal central frequency 20%.News Bulletin with Timeout SettingIt switches automatically when a news bulletinstarts even if the radio isn’t being listened to. Also,the time interval when interrupt is prohibited canbe set.Display and Setting"News OFF""News 00min"…"News 90min"When "News 00min" — "News 90min" is set, theNews Bulletin Interrupt function is ON.When it’s ON, the "NEWS " indicator is ON.When the news bulletin starts, "NEWS" isdisplayed, and it switches to the news bulletin.• If you choose the "20min" setting, further newsbulletins will not be received for 20 minutes once thefirst news bulletin is received.• The news bulletin volume is the same level that wasset for 'Traffic Information' (page 18).• This function is only available if the desired stationsends PTY-code for news bulletin or belongs to'Enhanced Other Network'-Network sending PTY-codefor news bulletin.• When the News Bulletin Interrupt function is ON, itswitches to an FM station.