10 | KDC-W7541U/KDC-W7541UY/KDC-W7041U/KDC-W7141UYDisplay SettingsFunction of KDC-W7541U/W7541UYFont Color SelectionSelecting the display font color.1 Enter Font Color Selection mode (In DisplayType A/ B/ C)Select “DISP” > “COLOR”.For how to select Function Control item, refer to (page 6).2 Select the text display part (Display Type B/ Conly)Push the Control knob towards up or down.The cursor (‰) moves to the selected text displaypart.3 Select the Font ColorTurn the Control knob or push it towards leftor right.4 Exit Font Color Selection modePress the Control knob.⁄• When you selected the Display Type A, select an easyviewable font color.Disc Naming (DNPS)Attaching a title to a CD.1 Play the disc you want to attach a name to2 Select Name set mode item during MenumodeSelect the “Name Set” display.For how to select Function Control items, refer to (page 6).3 Enter Name set modePress the Control knob for at least 1 second.4 Enter the nameOperation type OperationMove the cursor to the entercharacter positionPush the Control knob towards rightor left.Select the character type* Press the Control knob.Select the characters Turn the Control knob or push ittowards up or down.* Each time you press the knob, the character typealternates between the types shown in the table below.Character type Alphabet upper caseAlphabet lower caseNumbers and symbolsSpecial characters (Accent characters)⁄• Enter characters by using a remote control with numbersbuttons.Example: If you are entering “DANCE”.Character “D” “A” “N” “C” “E”Button [3] [¢] [2] [¢] [6] [¢] [2] [¢] [3]Times pressed 1 1 2 3 25 Exit Menu modePress the [FNC] button.⁄• A title cannot be attached to Audio file media.• When operation stops for 10 seconds the name at thattime is registered, and Name Set mode closes.• Media that you can attach a name to- Internal CD player: 10 discs- External CD changer/ player: Varies according to theCD changer/ player. Refer to the CD changer/ playermanual.• You can change the name of a CD by the sameoperation you used to name it.