English|21Audio Preset MemoryRegistering the value setup by Sound Control. Thememory cannot be erased by the Reset button.1Setup Sound ControlRefer to the following operations to setup theSound Control.- - 2Select Audio Preset item during Menumode (Other than Standby mode)Select the “Audio Preset” display.For how to select Function Control items, refer to (page 6).3Enter Audio Preset modePress the Control knob for at least 1 second.4Select the Audio Preset MemoryTurn the Control knob.Select the “Memory” display.5Determine whether to put the Audio Preset inthe memoryPress the Control knob.“Memory?” is displayed.6Put the Audio Preset in the memoryTurn the Control knob to select “YES”, and thenpress the Control knob.“Memory Completed” is displayed.7Exit Audio Preset modePress the [FNC] button.⁄• Register 1 pair of Audio Preset Memory. You cannotregister by the source.• When you press the Reset, all the sources will be thesetting value which is registered.• The following items cannot be registered.Volume, Balance, Fader, Loudness, Volume offset, DualZone System, Rear VolumeAudio Preset RecallRecalling the sound setup registered by Preset Memory> (page 21).1Select the sourceFor how to select source item, refer to Source Select button> of (page4).2Select Audio Preset item during Menumode (Other than Standby mode)Select the “Audio Preset” display.For how to select Function Control items, refer to (page 6).3Enter Audio Preset modePress the Control knob for at least 1 second.4Select the Audio Preset RecallTurn the Control knob.Select the “Recall” display.5Determine whether to recall the Audio PresetPress the Control knob.“Recall?” is displayed.6Recall the Audio PresetTurn the Control knob to select “YES”, and thenpress the Control knob.“Recall Completed” is displayed.7Exit Audio Preset modePress the [FNC] button.⁄• The User memory of “SYSTEM Q” in (page 19) is changed to the value which was recalled.• The source tone memory item of 19) is changed to the value which was recalled by theselected source.
