Kenwood KDC-X305 Instruction Manual

Also see for KDC-BT35: Quick start guide

6 ENGLISHDefault: [XX][TUNER SETTING][SEEK MODE] Selects the searching method for S / T buttons when pressed.[AUTO1]: Automatically search for a station. ; [AUTO2]: Search for apreset station. ; [MANUAL]: Manually search for a station.[AUTO MEMORY] [YES]: Automatically starts memorizing 6 stations with good reception. ;[NO]: Cancels.• Selectable only if [NORMAL] is selected for [PRESET TYPE].(Page 5)[MONO SET] [ON]: Improves the FM reception, but the stereo effect will be lost. ;[OFF]: Cancels.[TI] [ON]: Allows the unit to temporarily switch to Traffic Information ifavailable (“TI” indicator lights up) while listening to all sources except inAM. ; [OFF]: Cancels.[PTY SEARCH] Select the available Program Type (see “About Program Type” onpage 32), then press S / T to start.[CLOCK][TIME SYNC] [ON]: Synchronizes the unit’s time to the Radio Broadcast Data Systemstation time. ; [OFF]: Cancels.• [MONO SET]/[TI]/[PTY SEARCH] is selectable only when the band is FM1/FM2/FM3.• If the volume is adjusted during reception of traffic information, alarm ornews bulletin, the adjusted volume is memorized automatically. It will beapplied the next time traffic information, alarm or news bulletin is turnedon.Radio• “ST” indicator lights up when receiving an FM stereo broadcast withsufficient signal strength.• The unit switches to FM alarm automatically when receiving an alarmsignal from FM broadcast.Search for a station1 Press B SRC repeatedly to select RADIO.2 Press BAND repeatedly to select FM1/FM2/FM3/AM.3 Press S / T to search for a station.You can store up to 18 stations for FM and 6 stations for AM.• To store a station: Press and hold one of the number buttons (1 to 6).• To select a stored station: Press one of the number buttons (1 to 6).Other settings1 Press the volume knob to enter [FUNCTION].2 Turn the volume knob to select an item (see the following table), thenpress the knob.3 Repeat step 2 until the desired item is selected/activated or follow theinstructions stated on the selected item.4 Press and hold to exit.To return to the previous setting item, press .