Kenwood KDC-X494 Quick Start Manual

Also see for KDC-MP445U: Service manual Instruction manual Quick start guide

Kenwood KDC-X494 Quick Start Manual Manual pdf 45 page image

English | 294 Make a callPress the [ENTER] button.⁄• Pressing [S.MODE] button each time switches betweenname and telephone number.• The outgoing call list, the incoming call list, and the missedcall list, are the lists of calls originated from and receivedat this unit. They are not the ones stored in the cell-phonememory.Speed dialing (Preset dial)1 Enter Bluetooth modePress the [FNC] button for at least 1 second.“BT MODE” is displayed.2 Select the number you want to recall from thememoryTurn the Control knob to select recall number(“P1” – “P6”), and then press the [ENTER]button.3 Make a callPress the [ENTER] button.⁄• You need to register the preset dial number. Refer to (page 29).Registering to the Preset Dial NumberList1 Enter the phone number you wish to registerEnter the phone number with reference to thefollowing:Dialing a number/ Calling a number in the call log/Calling a number in the Phone Book2 Enter Preset Memory modePress the [ ] button.3 Select a number and store it in the memoryTurn the Control knob to select memorynumber (“P1” – “P6”), and then press the[ENTER] button for at least 2 second.Cancelling the Preset Memory modePress the [ ] button.During a callDisconnecting a CallPress the [SRC] button.Switching to the Private ModePush the Control knob towards right or left.Switches between Private talk (“PRIVATE”) andHands-free talk each time this button is pressed.⁄• Depending on the type of your cell-phone, switchingto the private talk mode may select the source that wasused before commencing the hands-free connection. Ifthis happens, the source cannot be switched back to thehands-free talk mode by operating this unit. Operate yourcell-phone to return to the hands-free talk mode.Adjusting the Voice Volume during a CallTurn the Control knob.Call waitingAnswering Another Incoming Call with theCurrent Call Suspended1 Press the [ENTER] button.2 Turn the Control knob to select “Answer”, andthen press the [ENTER] button.Answering another Incoming Call afterTerminating the Current CallPress the [SRC] button.Continuing the Current Call1 Press the [ENTER] button.2 Turn the Control knob to select “Reject”, andthen press the [ENTER] button.Answering the Waiting Call after Terminatingthe Current CallPress the [SRC] button.Switching between the Current Call and WaitingCallPress the [ENTER] button.Each pressing of this knob switches the callingparty.