Kenwood KDC-X494 Quick Start Manual

Also see for KDC-MP445U: Service manual Instruction manual Quick start guide

Kenwood KDC-X494 Quick Start Manual Manual pdf 46 page image

30 | KDC-X494/ KDC-MP445U/ KMR-440UMaking a voice dialing call1 Enter Bluetooth modePress the [FNC] button for at least 1 second.“BT MODE” is displayed.2 Enter voice recognize modePress the [AUDIO] button for at least 1 second.3 Have the unit recognize your spoken namePress the [ENTER] button. If you hear a beep,speak a registered name within 2 seconds.4 Have the unit recognize the spoken categoryWhen you hear a beep, speak the categorywithin 2 seconds.The recognized phone number (name) is displayed.When you want to change the displayed phonenumber (name), press the [S.MODE] button.5 Make a callPress the [ENTER] button.⁄• If your voice cannot be recognized, a message is displayed.Refer to (page 41).Pressing the [ENTER] button allows you to retry voice input.• Both the name and category requires registration of a voicetag. Refer to (page 36).Displays of phone number type(category)The category items in the Phone Book are displayedas follows:Display Information“General” / “ ” General“Home” / “ ” Home“Office” / “ ” Office“Mobile” / “ ” Mobile“Other” / “ ” OtherOperation of hands-free phoningFunction of KCA-BT200 (Optional Accessory)Clearing the Disconnection MessagePress the [FNC] button for at least 1 second.“HF Disconnect” disappears.