Kenwood KDC-X500 Instruction Manual

Also see for KDC-BT565U: Instruction manual

Contents

Kenwood KDC-X500 Instruction Manual Manual pdf 10 page image

6Other settings1 Press the volume knob to enter [FUNCTION].2 Turn the volume knob to select an item (see the following table), thenpress the knob.3 Repeat step 2 until the desired item is selected or activated.4 Press and hold to exit.To return to the previous setting item, press .Default: XXTUNER SETTINGAUTOMEMORYYES: Automatically starts memorizing 6 stations with good reception. ; NO: Cancels.• Selectable only if [NORMAL] is selected for [PRESET TYPE]. ( 4)MONO SET ON: Improves the FM reception, but the stereo effect may be lost. ; OFF: Cancels.TI ON: Allows the unit to temporarily switch to Traffic Information if available (“TI”lights up). ; OFF: Cancels.PTY SEARCH Select the available Program Type (see below), then, press S / T to start.CLOCKTIME SYNC ON: Synchronizes the unit’s time to the Radio Broadcast Data System station time. ;OFF: Cancels.Available Program Type for PTY SEARCHSPEECH : NEWS, INFORM (information), SPORTS, TALK, LANGUAGE, REL TALK (religious talk),PERSNLTY (personality), PUBLIC, COLLEGE, HABL ESP (spanish talk), WEATHERMUSIC : ROCK, CLS ROCK (classic rock), ADLT HIT (adult hits), SOFT RCK (softrock), TOP 40,COUNTRY, OLDIES, SOFT, NOSTALGA (nostalgia), JAZZ, CLASSICL (classical), R & B(rhythm and blues), SOFT R&B (soft rhythm and blues), REL MUSC (religious music),MUSC ESP (spanish music), HIP HOPThe unit will search for the Program Type categorized under [SPEECH] or [MUSIC] if selected.• [MONO SET]/ [TI]/ [PTY SEARCH] is selectable only when the band is FM1/ FM2/ FM3.• If the volume is adjusted during reception of traffic information, the adjusted volume is memorizedautomatically. It will be applied the next time traffic information is turned on.RADIOSearch for a station1 Press repeatedly to select TUNER.2 Press repeatedly (or press / onRC-406) to select FM1/ FM2/ FM3/ AM.3 Press S / T (or press S / on RC-406) to searchfor a station.• To change the searching method for S / T: Pressrepeatedly.AUTO1 : Automatically search for a station.AUTO2 : Search for a preset station.MANUAL : Manually search for a station.• To store a station: Press and hold one of the number buttons(1 to 6).• To select a stored station: Press one of the number buttons(1 to 6) (or press one of the number buttons (1 to 6) on RC-406).Direct Access Tuning (using RC-406)1 Press DIRECT to enter Direct Access Tuning.2 Press the number buttons to enter a frequency.3 Press to search for a station.• To cancel, press or DIRECT.• If no operation is done for 10 seconds after step 2, Direct AccessTuning is automatically canceled.JS_KWD_KDC_X500_KW_EN_00_6.indd 6 27/8/2015 3:00:24 PM