Kenwood KDC-X500 Instruction Manual

Also see for KDC-BT565U: Instruction manual

Contents

Kenwood KDC-X500 Instruction Manual Manual pdf 35 page image

ENGLISH 31When connecting to an external amplifier, connect its groundwire to the car’s chassis to avoid damaging the unit.Part list for installation(A) FaceplateWiring connection (for / )Fuse (10 A)Rear/ front/ subwoofer outputAntenna terminalCar fuse boxCar fuse boxBatteryIgnition switch Blue/White(Power control wire/Antenna control wire)Light blue/yellow(Steering remotecontrol wire)Red(Ignition wire)Yellow(Battery wire)Black (Ground wire)To the metallic body or chassis of the carTo the power control terminal when usingthe optional power amplifier or to theantenna control terminal in the vehicleBrown(Mute control wire)WhiteGrayGreenPurpleWhite/BlackGray/BlackGreen/BlackPurple/BlackTo connect the Kenwood navigationsystem, refer your navigations manualTo front speaker (left)To rear speaker (left)To front speaker (right)To rear speaker (right)If no connections are made, do not let the wire come out from the tab.To the steering wheel remote controladapter(C) Mounting sleeve(B) Trim plate(D) Wiring harness(E) Extraction keyMIC (Microphone input terminal) ( 15)Expansion port (12 V 500 mA)To the optional SiriusXM Vehicle Tuner(commercially available) ( 12)IMPORTANT : We recommend installing the unit with a commercially available custom wiring harness specific for your car and leave this job toprofessionals for your safety. Consult your car audio dealer.JS_KWD_KDC_X500_KW_EN_00_2.indd 31 10/7/2015 5:02:06 PM