Kenwood KDC-X597 Instruction Manual

Also see for KDC-BT355U: Instruction manual Instruction manual

Contents

AUDIO SETTINGSWhile listening to any source ...1 Press the volume knob to enter [FUNGION].2 Turn the volume knob to select [AUDIO CONTROL]/ [AUDIO GRL], then press theknob.3 Turn the volume knob to make a selection (see the following table), thenpress the knob.Repeat step 3 until the desired item is selected or activated.4 Press and hold~ to exit.(orusingRC-406)~~~~~~~~~~~~~~~~~~~~1 Press AUD to enter [AUDIO CONTROL]/ [AUDIO GRL].2 Press JJrt../T to make a selection, then press ENT ........• To return to the previous hierarchy, press~.Default: XXSUB-W LEVEL -15 to+ 15 (0): Adjusts the subwoofer output level.BASS LEVEL -8 to +8 (0):-MIDLEVEL--------=_ 8 t~ +B(m:____ Adju.sts the le~el to memorize for each source. (Before .-------------------------=------- makmg an adjustment, select the source you want to adjust.)TRE LEVEL -8 to +8 (0):14BASS ADJUST BASS GR FRQ 60/80/ 100/200: Selects the center frequency.-------------------------------------------~BASS LEVEL -8 to +8 (0): Adjusts the level.-------------------------------------------------------------------------BASS QFACTOR 1.00/1.25/1.50/2.00: Adjusts the quality factor.BASS EXTEND ON: Turns on the extended bass. ; OFF: Cancels.MID ADJUST MID GR FRQ 0.5K/1.0K/1.5K/2.5K: Selects the center frequency.----------------------------------------------------------MID LEVEL -8 to +8 (0): Adjusts the level.MID QFAGOR 0.75/1.00/1.25: Adjusts the quality factor.TRE ADJUST TRE GR FRQTRE LEVEL1O.OK/12.5K/15.0K/17 .5K: Selects the centerfrequency.-8 to +8 (0): Adjusts the level.PRESET EQBASS BOOSTLOUDNESSBALANCEFADERNATURAU USER/ ROCK/ POPS/ EASY/TOP40/ JAW POWERFUL: Selectsa preset equalizer suitable to the music genre. (Select [USER] to use thecustomized bass, middle, and treble settings.)B.BOOST LV1/ B.BOOST LV2/ B.BOOST LV3: Selects your preferred bassboost level.; OFF: Cancels.LOUDNESS LV1/ LOUD LV1/ LOUDNESS LV2/ LOUD LV2: Selects yourpreferred low and high frequencies boost to produce a well-balanced sound ata low volume level.; OFF: Cancels.L15 to R15 (0): Adjusts the left and right speaker output balance.R15 to F15 (0): Adjusts the rear and front speaker output balance.SUBWOOFER ON: Turns on the subwoofer output.; OFF: Cancels.SETI SUB-W SETHPF THROUGH: All signals are sent to the speakers.; 100HZ/ 120HZ/150HZ: Audio signals with frequencies higher than 100 Hz/ 120 Hz/ 150Hz aresent to the speakers.LPF SUBWOOFER/ THROUGH: All signals are sent to the subwoofer.; 85HZ/ 120HZ/LPF SUB-W 160HZ: Audio signals with frequencies lower than 85 Hz/ 120 Hz/ 160 Hz aresent to the subwoofer.SUB-W PHASE REVERSE/ REV (180°)/ NORMAL/ NORM (0°): Selects the phase ofthe subwoofer output to be in line with the speaker output for optimumperformance. (Selectable only if a setting other than [THROUGH] is selectedfor [LPF SUBWOOFER]/ [LPF SUB-W].)SUPREME SET ON: Creates realistic sound by interpolating the high-frequency componentsthat are lost in MP3/WMA audio compression.; OFF: Cancels. (Selectable onlywhen playing back an MP3/WMA disc or a USB device, except iPhone/iPod.)VOLUME OFFSET/ -8 to +8 (for AUX); -8 to 0 (for other sources): Presets the volumeVOL OFFSET adjustment level of each source. (Before adjustment, select the source you(Default: 0) want to adjust.)• 13•IIJI:iite1;.111: [SUB-W LEVEL]/ [SUB-W SET]/ [LPF SUB-W]/ [SUB-W PHASE] isselectable only if [SWITCH PRE] is set to [SUB-W]. (~ 4)• [SUB-W LEVEL]/ [LPF SUB-W]/ [SUB-W PHASE] is selectable only if [SUB-W SET] is setto [ON].