Kenwood KDC-X7006 Instruction Manual

Kenwood KDC-X7006 Instruction Manual Manual pdf 28 page image

28 | EnglishMenu system When LX AMP unit connectingAMP ControlYou can control the LX AMP connected to the unit.1 Select AMP Control modeTurn the Control knob.Select the "AMP Control" display.2 Enter AMP Control modePress the Control knob for at least 1 second.3 Select the AMP Control item for adjustmentPush the Control knob towards up or down.⁄• For the details on the AMP Control item, see theInstruction manual attached to the LX AMP.4 Adjust the AMP Control itemPush the Control knob towards right or left.5 Exit AMP Control modePress the [FNC] button.⁄• You cannot use the LX AMP operation during standbymode.In FM receptionCRSC (Clean Reception System Circuit)Temporarily have reception alternate from stereo tomono to reduce multi-path noise when listening tothe FM station.Display Setting"CRSC : ON" The CRSC is ON."CRSC : OFF" The CRSC is OFF.⁄• Strong electrical fields (such as from power lines) maycause unstable sound quality when CRSC is turned ON.In such a situation, turn it OFF.Other than Standby modeB.M.S. (Bass Management System)Adjust the bass boost level of the external amplifierusing the main unit.Display Setting"AMP Bass : Flat" Bass boost level is flat."AMP Bass : +6" Bass boost level is low (+6dB)."AMP Bass : +12" Bass boost level is mid (+12dB)."AMP Bass : +18" Bass boost level is high (+18dB).⁄• Refer to the catalog or instruction manual for poweramplifiers that can be controlled from this unit.• For amplifiers, there are the models you can set from Flatto +18 dB, and the models you can set from Flat to +12dB.When an amplifier that can only be set to +12 isconnected to the unit, "AMP Bass : +18" will not workcorrectly even if it is selected.Other than Standby modeB.M.S. Frequency OffsetSetting the central frequency, boosted by B.M.S.Display Setting"AMP FREQ : Normal" Boost with the normal central frequency."AMP FREQ : Low" Drop the normal central frequency 20%.