Kenwood KDC-X701 Instruction Manual

Kenwood KDC-X701 Instruction Manual Manual pdf 11 page image

ENGLISH 7RADIO (for / / )Search for a station1 Press repeatedly to select TUNER.2 Press repeatedly (or press / onthe remote control) to select FM1/FM2/FM3/AM.3 Press S / T (or press S / on the remotecontrol) to search for a station.• To change the searching method for S / T:Press repeatedly.AUTO1 : Automatically search for a station.AUTO2 : Search for a preset station.MANUAL : Manually search for a station.• To store a station: Press and hold one of the numberbuttons (1 to 6).• To select a stored station: Press one of the number buttons(1 to 6) (or press one of the number buttons (1 to 6) on theremote control).Direct Access Tuning (using the remote control)1 Press DIRECT to enter Direct Access Tuning.2 Press the number buttons to enter a frequency.3 Press to search for a station.• To cancel, press or DIRECT.• If no operation is done for 10 seconds after step 2, DirectAccess Tuning is automatically canceled.HD Radio™ tuner (for / )3 Press the volume knob to display the information related to the message.4 Press again to exit.• “NO LIST” appears when the list is empty.• This feature can store up to four messages in the list.• To clear the message list, set [FACTORY RESET] to [YES]. ( 5)Other settings1 Press the volume knob to enter [FUNCTION].2 Turn the volume knob to select an item (see the following table), then pressthe knob.3 Repeat step 2 until the desired item is selected or activated.4 Press and hold to exit.To return to the previous setting item, press .Default: XXTUNER SETTINGIF BAND AUTO: Increases the tuner selectivity to reduce interference noises from adjacentFM stations. (Stereo effect may be lost.) ; WIDE: Subjects to interference noises fromadjacent FM stations, but sound quality will not be degraded and the stereo effect willremain.AUTO MEMORY YES: Automatically starts memorizing 6 stations with good reception. ; NO: Cancels.• Selectable only if [NORMAL] is selected for [PRESET TYPE]. ( 4)RECEIVE MODE Sets the receive mode of the HD Radio receiver.AUTO: Automatically tunes to analog broadcast when there is no digital broadcast. ;DIGITAL: Tunes in to digital broadcast only. ; ANALOG: Tunes in to analog broadcastonly.CLOCKTIME SYNC ON: Synchronizes the unit’s time to the Radio Broadcast Data System station time. ;OFF: Cancels.