28Symptom RemedyGeneralSound cannot be heard. • Adjust the volume to the optimum level.• Check the cords and connections.“MISWIRING CHECK WIRINGTHEN POWER ON” appears.Turn the power off, then check to be sure theterminals of the speaker wires are insulated properly.Turn the power on again.“PROTECTING SEND TOSERVICE” appears.Send the unit to the nearest service center.• Sound cannot be heard.• The unit does not turn on.• Information shown on thedisplay is incorrect.Clean the connectors. ( 31)The unit does not work at all. Reset the unit. ( 3)(For )“SET ERROR”/“DELETE ERROR”Setting/deleting the remote control ID isunsuccessful. Turn the power off, then turn on thepower and perform the operation again.( 5)HD Radio/Radio • Radio reception is poor.• Static noise while listeningto the radio.Connect the antenna firmly.CD/USB/iPodDisc cannot be ejected. Press and hold M to forcibly eject the disc. Be carefulnot to drop the disc when it is ejected. If this does notsolve the problem, reset the unit. ( 3)Noise is generated. Skip to another track or change the disc.Tracks do not play back asyou intended them to play.Playback order is determined when files arerecorded.“READING” keeps flashing. Do not use too many hierarchical levels or folders.Elapsed playing time is notcorrect.This is caused by how the tracks are recorded.Default: XXDISPLAYCOLORSELECTSelect color for ALL ZONE, ZONE 1 and ZONE 2 separately.1 Select a zone. (See the illustration on page 27.)2 Select a color for the selected zone.VARIABLE SCAN/CUSTOM R/G/B/preset colors*Default: / / /: VARIABLE SCAN: CUSTOM R/G/B (R = 9/G = 9/B = 9)To make your own color, select [CUSTOM R/G/B]. The color you have madewill be stored in [CUSTOM R/G/B].1 Press the volume knob to enter the detailed color adjustment.2 Press S / T to select the color (R/G/B) to adjust.3 Turn the volume knob to adjust the level (0 to 9), then press the knob.DIMMER Dim the illumination.ON: Dimmer is turned on. ; OFF: Cancels.DIMMER TIME: Set the dimmer on and off time.1 Turn the volume knob to adjust the [ON] time, then press the knob.2 Turn the volume knob to adjust the [OFF] time, then press the knob.(Default: [ON]: PM6:00; [OFF]: AM6:00)BRIGHTNESS 1 Select a zone. (See the illustration on page 27.)2 LEVEL 0 to LEVEL 31: Select your preferred brightness level for theselected zone.TEXT SCROLL AUTO/ONCE: Select whether to scroll the display information automatically,or scroll only once. ; OFF: Cancels.* Preset colors: RED1/RED2/RED3/PURPLE1/PURPLE2/PURPLE3/PURPLE4/BLUE1/BLUE2/BLUE3/SKYBLUE1/SKYBLUE2/LIGHTBLUE/AQUA1/AQUA2/GREEN1/GREEN2/GREEN3/YELLOWGREEN1/YELLOWGREEN2/YELLOW/ORANGE1/ORANGE2/ORANGEREDDISPLAY SETTINGS TROUBLESHOOTINGENGLISH