Kenwood KDC-X7100DAB Instruction Manual

Also see for KDC-X7100DAB: Instruction manual

Contents

ENGLISH 35INSTALLATION/CONNECTIONWiring connectionFuse (10 A)Antenna terminalCar fuse boxCar fuse boxBatteryIgnitionswitchBlue/White(Power control wire/Antenna control wire)(12 V 350 mA)Light blue/yellow(Steering remote controlwire)Red (Ignition wire)Yellow (Battery wire)Black (Ground wire)To the metallic body or chassis of the carTo the power control terminal when usingthe optional power amplifier or to theantenna control terminal in the vehicleBrown(Mute control wire)WhiteGrayGreenPurpleWhite/BlackGray/BlackGreen/BlackPurple/BlackTo connect the Kenwood navigationsystem, refer your navigation manualIf no connections are made, do not let the wire come out from the tab.To the steering wheel remote control adapterWhen connecting to an external amplifier, connect its ground wire tothe car’s chassis to avoid damaging the unit.IMPORTANT : We recommendinstalling the unit with acommercially available customwiring harness specific foryour car and leave this job toprofessionals for your safety.Consult your car audio dealer.Microphone input jack ( 14)To front speaker (left)/For 3-way crossover: Mid range speaker (left)To rear speaker (left)/For 3-way crossover: Tweeter (left)To front speaker (right)/For 3-way crossover: Mid range speaker (right)To rear speaker (right)/For 3-way crossover: Tweeter (right)Rear/Front/Subwoofer outputFor 3-way crossover: Tweeter/Mid Range/Woofer outputDAB antenna jack ( 6)Auxiliary cableUSB 1 cable(DC 5V 1.5A)USB 2 cable(DC 5V 1.5A)