Kenwood KDC-X7100DAB Instruction Manual

Also see for KDC-X7100DAB: Instruction manual

Contents

ENGLISH 37CautionWhen installing the antenna cable inside the frontpillar with the air bag installed• The front pillar cover is secured with a special clip whichmay need to be replaced when it is removed.Contact your vehicle dealer for details on removing thefront pillar cover and availability of replacement parts.• Install the amplifier unit (G) above the air bag so that itdoes not obstruct the operation of the air bag.(G)Installation overviewThe antenna should be installed on the passenger sidefor safety.INSTALLATION/CONNECTIONAntenna installation1 Remove the front pillar cover of your car.Front pillar2 Clean the windscreen with the suppliedcleaner (I).(I)– Wait until the glass surface is completelydry before proceeding.– Warm the surface of the windscreen withdefroster if it is cold (during winter).3 Remove the separator (tag 1) of filmantenna (F) horizontally and paste theantenna on the windscreen.Do not touch the pasting surface (adhesiveside) of the film antenna (F).Separator (tag 1)ClipFront pillarAir bag

/ 40

Related manuals for Kenwood KDC-X7100DAB