Kenwood KDC-X717 Instruction Manual

Also see for KDC-9017: Service manual

• You can give names to discs through the presetting discname function (page 30).Note that depending on the unit, display may not bepossible.• If you try to display the name of a disc that doesn't haveone, "NO NAME" is displayed instead.• When there is an attempt to display the title of a disc forwhich the disc title/track title has not been recorded, "NOTEXT" is displayed for CD and "NO TITLE/NO NAME" isdisplayed for MD.• If you attempt to display disc title/track title whenconnecting the CD changer not supported for CD textfeature, caution messages such as "NO TEXT" or "Reading"may be displayed.• Depending on the type of characters of the CD Text, somecharacters may not be displayable.• Please see the menu settings about selecting the display mode.For details refer to the Switching Display Mode page for themenu settings. (page 33)• The same items cannot be selected for both the upper part andthe lower part.NOTENOTEIf the RDS station currently tuned to is transmitting no textwhile the Radio Text Display mode is turned on, "NO TEXT"will appear in the display. While awaiting reception, "Waiting"will be displayed.To prevent accidents, drivers should not look at the displaywhile on the road.In CD/External disc control mode:Spectrum Analyzer1Spectrum Analyzer2 + ClockGraphic + Clock (KDC-X717 only)Date + Function indicator (KDC-X917/X817/9017)/Date (KDC-X717)Disc name (DNPS)* + Function indicator (KDC-X917/X817/9017)/Disc name (DNPS)* (KDC-X717)Disc Title** + Function indicator (KDC-X917/X817/9017)/Disc Title** (KDC-X717)Track Title** + Function indicator (KDC-X917/X817/9017)/Track Title** (KDC-X717)* (only when being preset)** (Units featuring CD text/MD only)Spectrum Analyzer2 + Graphic (KDC-X717 only)2 WARNINGNOTE— 13 —