Kenwood KDC-X7529 Instruction Manual

Also see for KDC-X7529: Service manual Service manual

Kenwood KDC-X7529 Instruction Manual Manual pdf 15 page image

English | 15Function of remoteDirect Access TuningEntering the frequency and tuning.1 Select the bandPress the [FM] or [AM] button.2 Enter Direct Access Tuning modePress the [DIRECT] button on the remote."– – – –" is displayed.3 Enter the frequencyPress the number buttons on the remote.Example:Desired frequency Press button92.1 MHz (FM) [0], [9], [2], [1]810 kHz (AM) [0], [8], [1], [0]Canceling Direct Access TuningPress the [DIRECT] button on the remote.Station Preset MemoryPutting the station in the memory.1 Select the bandPush the Control knob to [FM] or [AM].2 Select the frequency to put in the memoryPush the Control knob to [4] or [¢].3 Put the frequency in the memoryPress the desired [1] — [6] button for at least2 seconds.The preset number display blinks 1 time.On each band, 1 station can be put in thememory on each [1] — [6] button.Auto Memory EntryPutting stations with good reception in thememory automatically.1 Select the band for Auto Memory EntryPush the Control knob to [FM] or [AM].2 Open Auto Memory EntryPress the [AME] button for at least 2 seconds.When 6 stations that can be received are put inthe memory Auto Memory Entry closes.Preset TuningCalling up the stations in the memory.1 Select the bandPush the Control knob to [FM] or [AM].2 Call up the stationPress the desired [1] — [6] button.Frequency Step SettingChanging the tuning frequency step.The original setting is FM band 50 kHz, and AMband 9 kHz.1 Turn the power OFFPress the [SRC] button for at least 1 second.2 Switch the frequency stepWhile pressing the [1] and [5] button, pressthe [SRC] button.Release your fingers from the button after thedisplay is appeared.The frequency step changes to FM band 200 kHz,and AM band 10 kHz.• When the same operation is repeated, it returns to theoriginal setting.• When the frequency step is switched, the frequenciesin the memory are deleted.