Kenwood KDC-X7529 Instruction Manual

Also see for KDC-X7529: Service manual Service manual

Kenwood KDC-X7529 Instruction Manual Manual pdf 27 page image

English | 27Audio Preset MemoryRegistering the value setup by Sound Control. Thememory can't be erased by the Reset button.1 Setup Sound ControlRefer to the following operations to setup theSound Control.-

2 Enter Menu modePress the [MENU] button for at least 1 second."MENU" is displayed.3 Select Audio Preset modePush the Control knob to [FM] or [AM].Select the "A-PRESET" display.4 Enter Audio Preset modePress the Control knob for at least 1 second.5 Select the Audio Preset MemoryPush the Contol knob to [FM] or [AM].Select the "MEMORY" display.6 Put the Audio Preset in the memoryPress the Control knob for at least 2 seconds.The "MEMORY" display blinks 1 time.7 Exit Menu modePress the [MENU] button.• Register 1 pair of Audio Preset Memory. You can'tregister by the source.• When you press the Reset, all the sources will be thesetting value which is registered.• The following items can't be registered.Volume, Balance, Fader, Loudness, Volume offset, DualZone System, Rear VolumeAudio Preset CallRecalling the sound setup registered by Preset Memory> (page 26).1 Select the sourcePress the [SRC] button.2 Enter Menu modePress the [MENU] button for at least 1 second."MENU" is displayed.3 Select Audio Preset modePush the Control knob to [FM] or [AM].Select the "A-PRESET" display.4 Enter Audio Preset modePress the Control knob for at least 1 second.5 Select the Audio Preset CallPush the Contol knob to [FM] or [AM].Select the "CALL" display.6 Call up the Audio PresetPress the Control knob for at least 2 seconds.The "CALL" display blinks 1 time.7 Exit Menu modePress the [MENU] button.• The User memory of (page 10) ischanged to the value which was recalled.• The source tone memory item of

(page 9) is changed to the value which was recalledby the selected source.