Kenwood KDC-X8016BT Instruction Manual

Also see for KDC-X7016: Service manual Quick start guide

Contents

Kenwood KDC-X8016BT Instruction Manual Manual pdf 19 page image

English | 19Auto Memory EntryPutting stations with good reception in the memoryautomatically.1 Select the radio band you wish to store in thepreset memory2 Enter Menu List modePress the [MENU] button.3 Enter Auto Memory Entry modeTurn the [VOL] knob and press it when thedesired item is displayed.Select “Settings” >> “Auto Memory”.4 Open Auto Memory EntryTurn the [VOL] knob and press it when thedesired item is displayed.Select “YES”.When 6 stations that can be received are put in thememory, auto memory entry closes.Preset TuningRecalling the stations in the memory.1 Select the radio band2 Select a desired station in the memoryTurn the [VOL] knob and press it when thedesired item is displayed.Select “List & Memory” >> Preset number.Function of remote controlDirect Access TuningTuning in a desired radio station by entering thefrequency.1 Select the radio band2 Enter Direct Access Tuning modePress the [DIRECT] button on the remotecontrol.“– – – –” is displayed.3 Enter the frequencyPress the number buttons on the remotecontrol.Example:Desired frequency Press button92.1 MHz (FM) [9], [2], [1]810 kHz (AM) [8], [1], [0]4 Tune in to the entered frequencyPress the [4] or [¢] button.Cancelling Direct Access TuningPress the [DIRECT] button on the remotecontrol.Frequency Step SettingChanging the tuning frequency step.The original setting is FM band 50 kHz, and AMband 9 kHz.1 Turn the power OFFPress the [SRC] button for at least 1 second.2 Switch the frequency stepWhile pressing the [VOL] knob and the [DISP]button, press the [SRC] button.Release your fingers from the button after thedisplay appears.The frequency step changes to FM band 200 kHz,and AM band 10 kHz.⁄• When the same operation is repeated, the frequencystep returns to the original setting.• When the frequency step is changed, the frequencies inthe memory are deleted.