English | 5Before UsingExit of the Demonstration ModeTurn off the demonstration mode when you use itfor the first time after installation.1 Press the [VOL] knob to quit the demonstrationmode when the messages “To cancel Demopress the volume knob” are displayed (approx. 15seconds).2 Turn the [VOL] knob to select “YES” and press the[VOL] knob.⁄• Demonstration mode can also be cancelled in “DEMOMode” of Menu List mode. Refer to Setting> (page 31).Common OperationPower and source selectTurns the power ON by pressing the [SRC]button.When the power is ON, select a source.• SRC Select mode 1: Press the [SRC] button andthen turn the [VOL] knob. To determine theselected source, press the [VOL] knob.• SRC Select mode 2: Pressing the [SRC] buttoneach time switches between sources.Tuner (“TUNER”) ➜ Bluetooth Audio (“BTAUDIO”) (KDC-X8016BT, KDC-X8016BTL only)➜ USB (“USB”) or iPod (“iPod”) ➜ CD (“CD”) ➜Auxiliary input (“AUX”) ➜ Standby (“STANDBY”)➜ Tuner...Keeping pressing the [SRC] button for at least 1second turns the power OFF.⁄• The SRC Select mode can be set in “SRC Select” of Settings> (page 30).• Auxiliary input source is initially set to “OFF”. Set “Built inAUX” described in (page 30) to “ON”.• When an optional accessory is connected, the source namefor each device appears.• When connection of the iPod is recognized, the sourcedisplay changes from “USB” to “iPod”.VolumeTurning the [VOL] knob adjusts the soundvolume.Menu List OperationThe basic operating procedure for using thisfunction is described below. The individual functionitems are covered in the operating procedures.1 Select the sourcePress the [SRC] button. Turn the [VOL] knoband press it when the desired item is displayed.Function items vary from source to source. For a listof the function items. Refer to ✍ SRC Select mode 2: Pressing the [SRC] buttonrepeatedly switches source.2 Select the setting itemPress the [MENU] button.3 Select your desired setup itemTurn the [VOL] knob and press it when thedesired item is displayed.Repeat the operation until your desired setup itemis selected.✍ Press the [MENU] button to return to theprevious item.Operation example:MusicPlayListsMy…ArtistsAlbums…Play Mode…[VOL] [MENU][VOL] [MENU]1 122 343 1 32 41 sec.In this manual, the above selection is indicated asSelect “Music” > “Playlists” > “My Best 25”.4 Make a setting• When the “ PUSH ” icon is displayed (at theright edge of the display)Turn the [VOL] knob to select a setting value,and then press the [VOL] knob.• When the “ PUSH ” icon is not displayedPress the [4] or [¢] button to select asetting value.5 Exit Menu List modePress the [MENU] button for at least 1 second toreturn to the first hierarchy. Press the [MENU]button in the first hierarchy to exit the MenuList mode.⁄• You cannot set the item with the “ ” icon displayed.General operation
