Kenwood KDC-X998 Instruction Manual

Also see for KDC-BT858U: Quick start guide

Contents

52 | KDC-X998/ KDC-BT958HD/ KDC-X898/ KDC-BT858UListen to the tuner (KDC-X898, KDC-BT858U)11-5. Tuner settingYou can set up the tuner.1 Press [SRC] and select a Tuner (“TUNER”)source using [Control] knob.Refer to (page 14).2 Press [Control] knob.Enters the Function setting mode.3 Select “Settings” using [Control] knob.For how to use [Control] knob, refer to <3-3. Howto select the item> (page 13).4 Select a Tuner setting item using [Control]knob.Display Description“Seek Mode” Sets the seek mode.“Auto1”: Automatic search for a station.“Auto2”: Search in order of the stations in the presetmemory.“Manual”: Normal manual tuning.“AutoMemory”Memorizes 18 (FM) or 6 (AM) stations with goodreception automatically.Refer to <11-3. Auto memory> (page 51).“MONO”[1] You can reduce the noise when stereo broadcasts arereceived as monaural.“ON” / “OFF”“PTYSearch”[1]Selects the Program Type and searches for a station.Refer to <11-7. PTY (Program Type)> (page 53).“TI”[1] Switches to the traffic information automatically whenthe traffic bulletin starts.“ON” / “OFF”(Colored text: Factory setting)[1] Displayed only when FM broadcast is received.5 Select a setting using [Control] knob.Returns to the previous item.Exiting from the Function setting modePress and hold [1/6].11-6. Direct access tuning(Function of remote control)You can search for a station directly by enteringfrequency.1 Press [DIRECT] on the remote control.“– – – –” appears and enter the Direct access tuningmode.2 Press the number buttons on the remotecontrol to enter the frequency.Example:Desired frequency Press the following buttons92.1 MHz (FM) [9], [2], [1]810 kHz (AM) [8], [1], [0]3 Press [ENT] on the remote control.Exiting from the Direct access tuning modePress [6] on the remote control.