English— 36 —? The Security Code item isn’t displayed in the Menu System.32✔ The Security Code function is already activated.☞ When the Security Code function is activated it isn’t displayed inthe menu items.? The Touch Sensor Tone doesn’t sound.34✔ The preout jack is being used.☞ The Touch Sensor Tone can’t be output from the preout jack.? Even though the vehicle light switch is turned ON, the unit’s displaywon’t dim.36✔ The dimmer wire isn’t connected.☞ Connect the dimmer wire correctly.? The Dimmer function doesn’t work. 38-1✔ The Dimmer wire isn’t connected correctly.☞ Check the Dimmer wire connection.? AUX cannot be selected. 103✔ is turned off.☞ Refer to the (page 28) in themenu setting and turn on the .Tuner source? Radio reception is poor.39✔ The car antenna is not extended.☞ Pull the antenna out all the way.✔ The antenna control wire is not connected.40☞ Connect the wire correctly, referring to the section on.? The desired frequency can’t be entered with the Direct AccessTuning.41✔ A station that can’t be received is being entered.☞ Enter a station that can be received.✔ You’re trying to enter a frequency with a 0.01 MHz unit.42☞ What can be designated in the FM band is to 0.1 MHz.Disc source? "AUX" is displayed without achieving External disc control mode.50✔ O-N switch is set to "O" side.☞ Set the switch to "N" side.✔ Unsupported disc changer is connected.51☞ Connect the supported disc changer. (page 3)? The specified disc does not play, but another one plays instead.52✔ The specified CD is quite dirty.☞ Clean the CD.✔ The CD is upside-down.53☞ Load the CD with the labeled side up.✔ The disc is loaded in a different slot from that specified.54☞ Eject the disc magazine and check the number for the specifieddisc.✔ The disc is severely scratched.55☞ Try another disc instead.? The specified track will not play.58✔ Random play or magazine random play has been selected.☞ Turn off random play or magazine random play.? Track repeat, disc repeat, track scan, random play, and magazinerandom play start by themselves.59✔ The setting is not canceled.☞ The settings for these functions remain on until the setting to offor the disc ejected, even if the power is turned off or the sourcechanged.Troubleshooting Guide